Find Wireless Wifi Module, Repeater Wifi, Usb 2.0 Wifi Module on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > WIFI Modules > Skylab AP wireless wifi Module SPI 802.11n 3.3V USB 2.0 interface WiFi repeater with IPEX Connector or PCB Antenna

Skylab AP wireless wifi Module SPI 802.11n 3.3V USB 2.0 interface WiFi repeater with IPEX Connector or PCB Antenna

Product Description

Skylab AP wireless wifi Module SPI 802.11n 3.3V USB 2.0 interface WiFi repeater with IPEX Connector or PCB Antenna  Product Description    The SKW71 module integrates a 1T1R 802.11n Wi-Fi radio, a MIPS 24K processor, 2-port fast Ethernet PHY, USB2.0 host, I2S and multiple slow IOs. Solution for low power, low-cost, and highly integrated AP router and consumer electronic devices, the module requires only an external 3.3V power supply. It supports 802.11n operating up to 72.2 Mbps for 20 MHz and 150 Mbps for 40 MHz channel respectively, and IEEE 802.11b/g data rates. The module supports AP mode and client mode and repeater mode and UART WiFi. The high performance module can process advanced applications effortlessly, such as routing, security and VoIP. Features   Compliant to IEEE 802.11b/g/n 1x1WLANs   DDR2 memory up to 512Mb   Flash memory up to 64Mb   1LAN ports and 1 WAN port   High-speed UART   USB 2.0 host device mode support   Support I2S/SPDIF interface     Support AP/Client/Repeater mode   Support UART to WiFi transparent   Security: WEP 64/128, WPA, WPA2, TKIP, AES, WAPI     RoHS compliance meets environment-friendly requirement.   45(L) x 17.3(W) x 9.0(H) mm small dimension Applications   AP WiFi   UART WiFi   Repeater WiFi   IP TV   IP DVD(Internet VOD Player)   Building Automation   Home Automation   Gaming Consoles    DVR
Hardware Features
Model SKW71
Antenna Type IPEX Connector or PCB Antenna
Chipset Solution AR9331
Voltage 3.30V+/-10%
Dimentions(W×D) 45mm*17.3mm
Wireless Features
Wireless Standards IEEE 802.11n, IEEE 802.11g, IEEE 802.11b
Frequency Range 2.400GHz---2.4835GHz
Data Rates IEEE 802.11 b Standard Mode: 1,2,5.5,11Mbps
IEEE 802.11g Standard Mode: 6,9,12,18,24,36,48,54Mbps
IEEE 802.11n : 65Mbps @ HT20
150Mbps @ HT40
Receiver Sensitivity 135M: -65dBm@10% PER(MCS7)
72.2M: -70dBm@10% PER(MCS7)
54M: -75dBm@10% PER
11M: -86dBm@ 8% PER
Modulation Technique 802.11 Legacy b/g
DSSS (DBPSK, DQPSK, CCK)
OFDM (BPSK, QPSK, 16-QAM, 64-QAM)
Wireless Security WPA/WPA2, WEP, TKIP, and AES
Transmit Power IEEE 802.11n: 14dBm @HT40 MCS7
IEEE 802.11b: 18dBm
Work Mode Ad-Hoc / Infrastructure Mode/AP/Repeater/UART
Others
Certification CE, FCC, IC, RoHS
Environment Operating Temperature:-20℃~70℃
Storage Temperature: -65℃~150℃
Operating Humidity: 10%~90% Non-condensing
Storage Humidity: 5%~90% Non-condensing
 
Interfaces
USB
The USB interface support USB slave devices for USB disk and USB
3G/4G dongle and USB camera.
I2S
I2S/SPDIF out audio interface that support up to 48KHz sampling 
clock and a serial clock of more than 512* sampling frequency. 
It also supports seamless switching of the audio out stream from
I2S to SPDIF. I2S MIC is also supported.
UART
The UART default baud rate is 115200bps.
GPIO
SKW71 Pin Number GPIO Description Share Function
3 GPIO23 SPDIF_OUT SPDIF_OUT
5 GPIO19 I2S_WS I2S
7 GPIO22 I2S_MICIN
9 GPIO21 I2S_MCK
11 GPIO20 I2S_SD
13 GPIO18 I2S_CK
22 GPIO12 RESET_CONFIG  
21 GPIO11 JUMPSTART  
19 GPIO27 LED7/SYSTEM LED LED
21 GPIO26 LED8/JMP_START LED
16 GPIO17 LED6/WLAN LED
15 GPIO13 LED2/LAN_PORT0_LED
14 GPIO1 LED1/USB LED
13 GPIO0 LED0/Wireless LED
Skylab AP wireless wifi Module SPI 802.11n 3.3V USB 2.0 interface WiFi repeater with IPEX Connector or PCB AntennaSkylab AP wireless wifi Module SPI 802.11n 3.3V USB 2.0 interface WiFi repeater with IPEX Connector or PCB AntennaSkylab AP wireless wifi Module SPI 802.11n 3.3V USB 2.0 interface WiFi repeater with IPEX Connector or PCB Antenna Skylab AP wireless wifi Module SPI 802.11n 3.3V USB 2.0 interface WiFi repeater with IPEX Connector or PCB Antenna More Customer Choice Test & Certificates Skylab AP wireless wifi Module SPI 802.11n 3.3V USB 2.0 interface WiFi repeater with IPEX Connector or PCB Antenna
For more company information. Please click contact us>
Our Service Skylab AP wireless wifi Module SPI 802.11n 3.3V USB 2.0 interface WiFi repeater with IPEX Connector or PCB Antenna
For more Our Service information. Please click contact us>
Project Development Skylab AP wireless wifi Module SPI 802.11n 3.3V USB 2.0 interface WiFi repeater with IPEX Connector or PCB Antenna
For more Project Development information. Please click contact us>
SKYLAB Team Skylab AP wireless wifi Module SPI 802.11n 3.3V USB 2.0 interface WiFi repeater with IPEX Connector or PCB Antenna
For more Company information. Please click contact us>
FAQ Skylab AP wireless wifi Module SPI 802.11n 3.3V USB 2.0 interface WiFi repeater with IPEX Connector or PCB Antenna  Contact us Skylab AP wireless wifi Module SPI 802.11n 3.3V USB 2.0 interface WiFi repeater with IPEX Connector or PCB Antenna Any Question,Please send to inquiry,click here please!

Contact us if you need more details on Wireless Wifi Module. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Repeater Wifi、Usb 2.0 Wifi Module. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : WIFI Modules > WIFI Modules