SAE J1939M to J1939P cable assemblies
Payment Type: | T/T |
---|---|
Terms of Trade: | FOB,CIF |
Min. Order: | 1000 Piece/Pieces |
Delivery Time: | 30 Days |
Packaging: | Standard neutral packing |
---|---|
Productivity: | 5k/day |
Brand: | molex, tyco, delphi |
Transportation: | Ocean,Land,Air |
Place of Origin: | CHINA |
Supply Ability: | 20k/month |
Certificate: | IATF16949, UL, ISO9001 |
HS Code: | 8544422100 |
Port: | SZ,HK |
Basic Info
Model No.: ETOP-2010
Product Description
The SAE J1939 standard is the replacement for the older J1708 and J1587 protocols. The J1939 standard defines a huge number of parameters which can be monitored and are referred to by Parameter Group Number or PGN. Below are some examples of our software in use collecting J1939 CAN data on the daily route of a waste collection heavy vehicle.
Automotive Diagnostic Connectors And Cables,
Obd Connectors,Reliable OBD Connector,Black OBD Connector,
OBD Diagnostic Cable,OBD2 Connectors
Vehicle Diagnostic Cables,Diagnostic OBD Cable,
Heavy Vehicle Diagnostic Cables,OBD2 Splitter Y Cables,
OBD2 Diagnostic Adapters,OBD Heavy Vehicle Cables
Speaker Cable,Straight Bnc Cable Assembly,Idc Red Custom Cable Assembly,
Customized Cable Assemblies,EV Cable Assemblies,Cable Assembly,Custom Cable,Customized Cable Assemblies
We can give you a customized data collection solution for the specific parameters you desire.
Green Type 2 J1939 9pin Splitter Y Cable for Truck Freightliner GPS ELD Tracker Fully Connected work with both J1939 Type I 250Kb/s and Type II 500Kb/s Black or Green Connectors
Fits either Twist Lock or Flange Nut Type Dash Mounts (2 Male). Has all 9pins connected fully one by one. Allows 2 devices or cables to be connected.

These cable assemblies are widely used in automotive diagnostic equipment, Vehicle GPS Tracking, industrial equipment, agricultural machinery, marine diagnostic equipment, military products, medical equipment, IT/Communication field, water pump, trailer lighting equipment, common trial injector equipment, handheld diagnostic tools.All these products are customized to meet any needs and requirements from the customers all over the world. We mainly offering test lead kits, marine electrical connectors, motorcycle wire harness, truck cable, trailer connector, wiring trailer light, marine wire harness, custom wire harness assembly, plastic enclosure, PCB assembly, etc.
J1939-9Pin Type 2 splitter cable with Jamnut
J1939-9Pin Male to Female*2 cable
J1939 Splitter cable for Truck Trackig Device
J1939 Pass through cable for Truck Trackig Device
SAE J1939-9pin Pass through cable
J1939-9Pin Green Male+Female to OBD female cable
Heavy Vehicle J1939 9-Pin Telematics Cables
ELD cables
We at OBD Diagnostics Inc have developed a software package for use with our OBD2allinone scan tool for J1939 data logging and diagnostics. The J1939 protocol is used for heavy vehicle and industrial applications, and is based on the OBD2 Controller Area Network, CAN, protocol used in all new vehicles.
A few of the myriad uses are:
diesel powertrain systems
on and off road gasoline powered vehicles
liquid natural gas LNG vehicles
agriculture and forestry machinery ISO 11783
intra vehicle networking for trucks and buses
power generation and industrial pumping
truck-trailer communication
recreational vehicles
marine systems NMEA2000
military vehicles MiLCAN
fleet management systems
ETOP WIREHARNESS LIMITED
ETOP WIREHARNESS LIMITED is an IATF-16949 and UL certified wiring assembly manufacturer, also the company is an R&D and manufacturing base of extensive wire harness and connectors. Located in Dongguan, Guangdong with a plant area reaching 15,000 m2.
Most of our customers are OEMs or ODMs in USA, Germany, Japan, Australia, Sweden, etc. ETOP has their special sampling production line, also with fully-equipped internal tooling department for SR, connector, plastic part, or any other tooling parts efficiently. And our dedicated team can support customers with much more suggestions and techinics for developing their new products. All these can help customers shorten the L/T a lot with most competitive tooling and sampling cost.
The main advantages of ETOP is to provide harness design assistance, rapid in-house prototyping(CAD, SOLIDWORK), manufacturing engineering, tool making, also accept flexible Qty,even including working round-the-clock to meet tight turning-round time requirements. Customer satisfaction is always our top priority.
With more than ten years of experience and capabilities assisting our customers in various industry, ETOP would be confident to be your qualified AVL and reliable manufacturing partner. Just be free to contact us if you need any wire-harness solutions or partner for your products. Our professional and experienced team would support you by satisfied skill and service.
Company Info
- Company Name: ETOP WIREHARNESS LIMITED
- Representative: Kavin Lee
- Product/Service: Wire Harness , Custom Cable Assemblies , Customized Molded Cables , Connectors , Automotive Wire Assembly , connectors overmolding
- Capital (Million US $): 1000000RMB
- Year Established: 2001
- Total Annual Sales Volume (Million US $): US$1 Million - US$2.5 Million
- Export Percentage: 91% - 100%
- Total Annual Purchase Volume (Million US $): Below US$1 Million
- No. of Production Lines: 5
- No. of R&D Staff: 21 -30 People
- No. of QC Staff: 41 -50 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 5,000-10,000 square meters
- Factory Location: No. 288, Jinyu Team, Dani Village, Shatian Town, Dongguan, Guangdong, China
- Contact Person: Ms. Nicole Peng
- Tel: 86-769-81710115
Premium Related Products
Other Products